Jinan Dongyuan Chemicals Co., Ltd. is headquartered in the beautiful Spring City of Jinan, Shandong Province, China. The company operates two state-of-the-art manufacturing bases equipped with 16 advanced automated production lines, reaching an impressive annual production capacity of approximately 60,000 tons, ensuring stable large-scale supply for global partners.
Alkali cellulose is a natural polymer in which each anhydroglucose ring contains three hydroxyl groups; these active hydroxyl groups undergo reactions to form hydroxyethyl cellulose. The raw material—typically cotton linters or refined pulp—is steeped in a 30% aqueous sodium hydroxide solution for 30 minutes, then removed and pressed. It is pressed until the ratio of alkali solution to cellulose reaches 1:2.8, after which it is shredded. The shredded alkali cellulose is loaded into a reaction vessel; the vessel is sealed, evacuated to a vacuum, and purged with nitrogen. This vacuum-and-purge cycle is repeated to completely displace the air within the vessel. Pre-cooled liquid ethylene oxide (EO) is then injected into the vessel. Cooling water is circulated through the vessel’s jacket to maintain a reaction temperature of approximately 25°C for 2 hours, yielding crude hydroxyethyl cellulose. The crude product is washed with alcohol, neutralized with acetic acid to a pH of 4–6, and subsequently treated with glyoxal for cross-linking and aging. Finally, the product is washed with water, dewatered via centrifugation, dried, and milled to obtain the finished hydroxyethyl cellulose. Raw Material Consumption (kg/t): Cotton linters or low-grade pulp: 730–780; Liquid NaOH (30%): 2400; Ethylene Oxide: 900; Alcohol (95%): 4500; Acetic Acid: 240; Glyoxal (40%): 100–300.
These production processes are further categorized into two methods: the Gas-Phase Method and the Liquid-Phase Method:
Gas-Phase Method
In the gas-phase method, additives or diluents are introduced during the reaction process, allowing the alkali cellulose and EO to react within a gaseous environment. Cotton fibers are steeped and activated in an 18.5% NaOH solution; after pressing and shredding, they are placed into a reactor. The reactor is evacuated to a vacuum and purged with nitrogen twice. EO is then introduced, and the reaction is allowed to proceed for 3 to 3.5 hours under a vacuum of 90.64 kPa and a temperature range of 27–32°C to yield the product.
Liquid-Phase Method
The liquid-phase method involves conducting the etherification reaction in the presence of a diluent. After undergoing alkalization and pressing, cotton linters are reacted with ethylene oxide (EO) in the presence of a diluent at 20–60°C for 1–3 hours to yield crude hydroxyethyl cellulose. Commonly used diluents include acetone, isopropyl alcohol, *tert*-butyl alcohol, or mixtures thereof. The product remains insoluble within the diluent medium.
Both the gas-phase and liquid-phase production processes require the prior preparation of alkali cellulose; specifically, cellulose is immersed in an 18% NaOH solution at approximately 20°C to undergo alkalization. Following the etherification reaction, the material undergoes neutralization, washing, drying, and pulverization to yield the final product.