Jinan Dongyuan Chemicals Co., Ltd. is headquartered in the beautiful Spring City of Jinan, Shandong Province, China. The company operates two state-of-the-art manufacturing bases equipped with 16 advanced automated production lines, reaching an impressive annual production capacity of approximately 60,000 tons, ensuring stable large-scale supply for global partners.
HPMC 100000 CPS: Characteristics and Suitable Formulation Uses
Home » Blog » HPMC 100000 CPS: Characteristics and Suitable Formulation Uses
Hydroxypropyl Methylcellulose (HPMC) with a nominal viscosity of 100,000 mPa·s (measured in a 2% aqueous solution at 20°C) represents a high-molecular-weight, non-ionic cellulose ether widely utilized across construction materials, industrial liquids, and pharmaceutical formulations. Derived from natural cotton or wood cellulose through chemical etherification, this polymer exhibits exceptional thickening efficiency, surface activity, and film-forming capabilities at relatively low addition rates. The 100,000 CPS viscosity grade strikes an ideal balance between ultra-high water retention and substantial structural body, making it a critical functional excipient and additive.
At the physical and chemical level, HPMC 100,000 CPS possesses non-ionic electrical neutrality, rendering it highly compatible with electrolytes, inorganic salts, and organic surfactants across a broad pH spectrum of 3 to 11. Its aqueous solutions exhibit classic pseudoplastic (shear-thinning) rheological behavior: under high shear stress—such as pumping or troweling—the fluid viscosity decreases to allow smooth application, whereas under static conditions, it rapidly recovers its high viscosity to maintain structural stability. Additionally, HPMC demonstrates reversible thermal gelation, where it forms a three-dimensional gel network when heated past its specific gelation point and returns to a liquid state upon cooling.
The exceptional water retention mechanism of HPMC 100,000 CPS is one of its most vital characteristics in hydraulic binder formulations. When dispersed in water, the polymer chain rapidly hydrates, binding free water molecules and forming a colloidal gel network that dramatically slows water loss due to substrate absorption or atmospheric evaporation. This sustained moisture presence ensures complete hydration of cementitious and gypsum binders, preventing premature cracking, chalking, and loss of ultimate mechanical bond strength.
In dry-mix construction mortars, HPMC 100,000 CPS is the industry standard for high-performance tile adhesives (especially C2-grade standard and large-format tile applications). At dosages typically ranging from 0.2% to 0.5% by dry weight, it imparts high yield stress, providing superior anti-sagging and anti-slip properties. Formulators rely on this viscosity grade to ensure that heavy porcelain or stone tiles stay positioned on vertical walls without slumping, while simultaneously extending the “open time” to 20–30 minutes, allowing installers sufficient time to make minor alignment adjustments.
Beyond tile adhesives, this cellulose ether is extensively incorporated into self-leveling underlayments, cement renders, exterior insulation finishing systems (EIFS), and wall skim coats. In gypsum-based plasters and joint fillers, HPMC 100,000 CPS improves workability and creaminess under the trowel, reduces tool stickiness, and prevents edge-cracking caused by rapid water loss into dry masonry substrates. Its air-entraining tendency also subtly enhances the coverage yield and thermal insulation properties of finished plaster layers.
In the pharmaceutical sector, high-viscosity hypromellose (commonly categorized as the K100M or E100M grade, corresponding to 100,000 mPa·s) serves as the leading matrix-forming polymer for oral sustained-release and controlled-release dosage forms. Upon contact with gastrointestinal fluids, the tablet surface rapidly hydrates to form a viscous, coherent gel barrier layer. This swollen gel layer regulates drug liberation over extended periods (8 to 24 hours) through a combined mechanism of drug diffusion through the hydrogel matrix and gradual polymer erosion.
In consumer chemical and industrial formulation sectors, HPMC 100,000 CPS functions as a primary thickener and suspension stabilizer for high-viscosity laundry detergents, gel cleaners, paint strippers, and water-based latex paints. It prevents the sedimentation of insoluble mineral particles, pigments, or abrasive granules over extended shelf life. Furthermore, its film-forming capability contributes to smooth protective coatings with moderate oxygen and moisture barrier properties on coated substrates.
Proper dispersion and dissolution techniques are critical when formulating with HPMC 100,000 CPS to avoid agglomeration and lump formation due to its rapid surface hydration. In dry-mix formulations, the polymer should be thoroughly dry-blended with coarse aggregate particles (such as cement, sand, or filler) before introducing water. In pure liquid systems, dispersing the powder into hot water (above 70°C) or organic non-solvents first, followed by cooling under agitation, ensures complete, uniform hydration and maximum viscosity development.